As an Amazon Associate I earn from qualifying purchases.1. Onite
Vintage Light Bulb Socket Adapter Connector, Onite 2pcs Lamp Bulb Holder with Safety Switch, B22 Bayonet Light Bulb Solid Brass Holder with Earthed Terminal, 10mm Threaded Entry Cable Buckle
Onite - Sturdy designbeautiful, cable/flexible the aperture is about 10 mm, retro light bulb holder is excellent complement to any style space, disassembly and assembly is very simple, unique and sturdy, safety switch push rod design, providing lighting for retro lamps. Wide applicationlight bulb sockets can be applied to all kinds of led, halogen, suitable for home installation, CFL bulbs of the B22 Bayonet Light Bulb model.
These retro-style bulb sockets are composed of 6 independent units, solid brass structure, suitable for all types of B22 22mm bayonet cap bulbs, suitable for lighting circuits. Don't worry. We do offer a 30-day money-back guarantee on all orders to allow you to test the suitability of our product.
We stand behind our products 100%. Easy to installonly needs a small slotted head screwdriver! after disassembly, find the wiring parts of the lamp holder, connect the live wire neutral wire to the screw terminal interface, tighten the screw and cut off the excess wire exposed outside the copper shell, assembled together.
Product guarantee and custome servicelet you use our light bulb holder with confidence. You must remember that before attempting to install, No need to judge the positive and negative poles ; Then after threading the earth wire out of the copper shell, please turn off the power switch!!! The lamp holder adopts solid brass structure, which is fireproof, heat-resistant and corrosion-resistant; safe insulater, and the brass shell of the lamp holder is insulated with a EARTHED TERMINAL to ensure safety! ! ! Comply with UK electrical safety standards, the input port at the bottom of the 10mm thread is equipped with a LOCKING WIRE BUCKLE, SAFETY INSULATION SWITCH, 30-day replacement warranty.
| Brand | Onite |
| Manufacturer | Onite |
| Weight | 0.09 kg (0.2 Pounds) |
2. ElekTek
ElekTek B22 BC Batten Lamp Holder 52mm Diameter Base 3 Fixing Holes, Brass
ElekTek - Made in the UK. Ceramic interior with Earth terminal and brass plunger contacts. B22 22mm bayonet cap with shade ring - suitable for bulbs up to 200W. Please check your bulb cap type & size before ordering. 3 fixing holes on 40mm centres PCD, Base diameter 52mm, Maximum height 39mm.
3. Thunderfix
Brass Lamp Holder Bayonet Cap BC B22d Fitting Bulb Holder 10mm Screw Thread
Thunderfix - Brass Finish Lampholder. Bayonet Cap Fitting. M10 x 1mm pitch Threaded Entry Size. These have Screw Terminals.
4. ElekTek
Brass Safety Switch Lamp Holder 10MM BC B22 with Shade Ring *** Made in UK ***
ElekTek - Important: switch will only work when a bulb is fitted - patented Safety Switch Push-Bar Design - MAKE SURE lamp holder is fully screwed together when assembled so that centre Safety Pin correctly depresses when a bulb is installed.
Suitable for lighting circuits only - T2 temperature rating 220°C. 7mm. Fully approved to BS 7895:1997. Made in uk: solid brass construction with solid brass Shade Ring. Always remember: Metal fittings MUST be earthed.
Dimensions: please check your thread size before you order - choice of 10mm m10 or 1/2" 26 tpi threaded bottom entry - as a guide, old lamps will 'tend' to be 1/2" imperial; Height: 63mm, newer lamps will 'tend' to be 10mm metric, Diameter: 32mm Max. Cable/Flex aperture/opening approx. For all types of b22 22mm bayonet Cap Bulb: Incandescent, LED and Halogen.
Onite - Sturdy designbeautiful, cable/flexible the aperture is about 10 mm, retro light bulb holder is excellent complement to any style space, disassembly and assembly is very simple, unique and sturdy, safety switch push rod design, providing lighting for retro lamps. Wide applicationlight bulb sockets can be applied to all kinds of led, halogen, suitable for home installation, CFL bulbs of the B22 Bayonet Light Bulb model.
ElekTek - Made in the UK. Ceramic interior with Earth terminal and brass plunger contacts. B22 22mm bayonet cap with shade ring - suitable for bulbs up to 200W. Please check your bulb cap type & size before ordering. 3 fixing holes on 40mm centres PCD, Base diameter 52mm, Maximum height 39mm.
Thunderfix - Brass Finish Lampholder. Bayonet Cap Fitting. M10 x 1mm pitch Threaded Entry Size. These have Screw Terminals.
ElekTek - Important: switch will only work when a bulb is fitted - patented Safety Switch Push-Bar Design - MAKE SURE lamp holder is fully screwed together when assembled so that centre Safety Pin correctly depresses when a bulb is installed.